Ich habe Storefront 3.0 und Receiver 4.3 kurz getestet. Zuerst funktionierte alles ganz nett und es vor allem das Citrix Receiver Setup und Deinstallieren war um Welten besser. Aber leider mochte er meine Storefront 3.0 Installation nicht und ich habe dann mangels Zeit aufgegeben. Ich bin aber wohl nicht der einzige, da im Citrix Forum auch. Also download and the firmware update for NetScaler Unified Gateway 11.0 build 62.10. to upgrade your NUG V/A.Note: The current supported Citrix Receivers (update ) are the Windows Receiver 4.3 or iOS Receiver 6.0. Citrix Receiver for Windows 4.3 Fixed Issues Dec 16, 2015 Compared to: Citrix Receiver for Windows 4.3 Receiver for Windows 4.3.100 contains all fixes that were included in Versions 4.0 through 4.3, plus the following, new fixes: Installing, Uninstalling, Upgrading Session/Connection Keyboard System Exceptions Local App Access User Experience. These are the LATEST Citrix Receiver 4 versions: (more details see in table at the bottom of the page) Download Citrix Receiver 4.12 (14.12.0.18020) Download Citrix Receiver 4.11 (14.11.0.17061).
UW Medicine Citrix information page
Applications available through UW Medicine Citrix:
·Sunquest GUI
·ORCA
·EPIC
Citrix Receiver instructions for Lab Med and UW Med (AMC) pcs
Citrix Receiver is already installed on your pc. Bring it up by going to Start Menu> All Programs> Citrix Receiver.
First time usage
1.Enter the following server address in the Add Account box: https://access.uwmedicine.org. Click Add button.
2.Log on with your UW Medicine (AMC) acct. Make sure to use this format: amcusername. Click Log On button.
3.Choose AMC Default Site and click Select button. Log in with AMC acct again if prompted. Click OK if needed.
4.Click the + sign.
5.Click All Applications, then click Sunquest. This will add a shortcut to the Citrix Receiver window. Repeat for EPIC Hyperspace or ORCA Powerchart if desired.
6.To use GUI, click the Sunquest icon.
Subsequent use
Open Citrix Receiver and log on with UW Medicine (AMC) acct. Click Sunquest shortcut icon.
Troubleshooting
SMART SPOT routing and printing settings
Citrix Receiver 4.3 Compatibility Matrix
By default, GUI does not have SMART settings configured. Before you can use Gen Lab or SMART, you must configure SMART settings. If you do not, you will get an error message and your routing will be incorrect.
First, look up your SMART SPOT info.
Next, configure SMART settings.
1.Log onto GUI.
2.Open SMART module.
3.Go to Maintenance menu and choose Options.
4.Click Select Printer button.
5.Enter printer number and click OK.
Citrix Receiver 4.3.0
6.Choose your Default SPOT and Default Start SPOT from the drop-down menus.
7.Click OK.
Note that this will only set your SMART SPOTs temporarily. For a permanent change, send an email to listest@uw.edu. Include your contact info, your lab location, your computer’s name, and your preferred SMART printer.
GUI application freezes or crashes
If a GUI application malfunctions or becomes unresponsive, you may have to force quit.
1.Right click on the Citrix Receiver icon in the lower right hand corner of your computer screen and choose Connection Center. If you don’t see the Citrix icon, then it may be hidden. Click the up arrow to show hidden icons.
2.Click the + next to the Sunquest server name (IV-CTX-SUNLAB1-4).
3.Highlight the crashed app, then click Terminate button.
4.Switch back to GUI and exit. Then switch back to Citrix Connection Center, click on Sunquest server name, and click Log Off button.
Note: If you are unable to exit GUI, switch back to Citrix Connection Center, click on Sunquest server name, and click Disconnect button. Then log back onto Citrix and try to exit GUI and log off Citrix again. You may need to repeat this process more than once to resolve. Also note that Citrix Connection Center may initially appear blank upon reconnection- you may have to wait a few minutes for your connection to show up so you can disconnect or log off.
Updated AS 10/22/17
Citrix Receiver 4.3.0 Download
How to disable the popup windows for Citrix Receiver when users login.
HKEY_LOCAL_MACHINESoftwareCitrixPNAgent :
Value Name:”SuppressURLPromptAtLogin”
DWORD:00000001
Disable Receiver Popup version 3.3 to version 4.3-
HKLMSoftwareCitrixDazzle “AllowAddStore”= N
x64 bit machines, use HKLMSoftwareWOW6432NodeCitrixDazzle “AllowAddStore” = N
HKCUSoftwareCitrixReceiver “EnableFTU”=dword:00000000
HKLMSoftwarePoliciesCitrix “EnableFTU”=dword:00000000
HKCUSoftwarePoliciesCitrix “EnableFTU”=dword:00000000
Citrix Receiver 4.4 use EnableX1FTU
HKCUSoftwareCitrixReceiver “EnableX1FTU”=dword:00000000
HKLMSoftwarePoliciesCitrix “EnableX1FTU”=dword:00000000